Metal surface treatment during coating
2022-12-30
3、 Treatment before metal coating (1) structural treatment of sharp corners, splashes, welding slag, welding holes, etc., chamfering treatment to reduce stress concentration, etc. (2) The surface shall be cleaned of oxide scale (rolling), rust, soluble salt, grease, insoluble solids, moisture (excluding water-based paint), etc. (3) The surface roughness improves the roughness and increases the mechanical engagement between the coating and the substrate. If the roughness is too large, the convex part may cause the local coating to be too thin, and the residual bubbles in the pits will lead to premature failure of the coating. Generally, the roughness should be 1/10 of the coating thickness.
关闭返回